dmesg - Hoodisk SSD
Linux version 4.15.0-140-generic (buildd@lcy01-amd64-020) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)) #144~16.04.1-Ubuntu SMP Fri Mar 19 21:23:00 UTC 2021 (Ubuntu 4.15.0-140.144~16.04.1-generic 4.15.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000865a5fff] usable
BIOS-e820: [mem 0x00000000865a6000-0x00000000865a6fff] ACPI NVS
BIOS-e820: [mem 0x00000000865a7000-0x00000000865a7fff] reserved
BIOS-e820: [mem 0x00000000865a8000-0x000000008c67bfff] usable
BIOS-e820: [mem 0x000000008c67c000-0x000000008cadcfff] reserved
BIOS-e820: [mem 0x000000008cadd000-0x000000008cb96fff] usable
BIOS-e820: [mem 0x000000008cb97000-0x000000008cf66fff] ACPI NVS
BIOS-e820: [mem 0x000000008cf67000-0x000000008d3fefff] reserved
BIOS-e820: [mem 0x000000008d3ff000-0x000000008d3fffff] usable
BIOS-e820: [mem 0x000000008d400000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0.0 present.
DMI: Default string Default string/SKYBAY, BIOS MSKU0501.V05 10/22/2020
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x16f000 max_arch_pfn = 0x1000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008E000000 mask 7FFE000000 uncachable
4 base 008D800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
found SMP MP-table at [mem 0x000fcd20-0x000fcd2f]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x043fffff]
RAMDISK: [mem 0x31a74000-0x34d31fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008CB970B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008CBBE388 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008CB97220 027168 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008CF36F00 000040
ACPI: APIC 0x000000008CBBE4A0 000068 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008CBBE508 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000008CBBE550 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008CBBE5F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008CBBE630 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000008CBBE990 00312E (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: HPET 0x000000008CBC1AC0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008CBC1AF8 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008CBC28E0 000024 (v02 INTEL xh_OEMBD 00000000 INTL 20160422)
ACPI: UEFI 0x000000008CBC2908 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000008CBC2950 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008CBC3830 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008CBC38C8 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000008CBC3A10 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008CBC3CB0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000008CBC6CB8 00050D (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000008CBC71C8 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008CBC7200 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: SSDT 0x000000008CBC7258 0010B0 (v02 ALASKA UsbCTabl 00001000 INTL 20160422)
ACPI: DMAR 0x000000008CBC8308 0000A8 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: TPM2 0x000000008CBC83B0 000034 (v03 ALASKA A M I 00000001 AMI 00000000)
ACPI: WSMT 0x000000008CBC83E8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
4986MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x00000000375fdfff]
HighMem [mem 0x00000000375fe000-0x000000016effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000865a5fff]
node 0: [mem 0x00000000865a8000-0x000000008c67bfff]
node 0: [mem 0x000000008cadd000-0x000000008cb96fff]
node 0: [mem 0x000000008d3ff000-0x000000008d3fffff]
node 0: [mem 0x0000000100000000-0x000000016effffff]
Reserved but unavailable: 101 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
On node 0 totalpages: 1029840
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3995 pages, LIFO batch:0
Normal zone: 2175 pages used for memmap
Normal zone: 222718 pages, LIFO batch:31
HighMem zone: 803127 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics memory at 0x000000008e000000-0x000000008fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x865a6000-0x865a6fff]
PM: Registered nosave memory: [mem 0x865a7000-0x865a7fff]
PM: Registered nosave memory: [mem 0x8c67c000-0x8cadcfff]
PM: Registered nosave memory: [mem 0x8cb97000-0x8cf66fff]
PM: Registered nosave memory: [mem 0x8cf67000-0x8d3fefff]
PM: Registered nosave memory: [mem 0x8d400000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x7f/0x438 with crng_init=0
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 29 pages/cpu s89164 r0 d29620 u118784
pcpu-alloc: s89164 r0 d29620 u118784 alloc=29*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists, mobility grouping on. Total pages: 1027625
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
microcode: microcode updated early to revision 0xde, date = 2020-05-27
Initializing CPU#0
Initializing HighMem for node 0 (000375fe:0016f000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 3938616K/4119360K available (9018K kernel code, 895K rwdata, 3468K rodata, 1112K init, 860K bss, 180744K reserved, 0K cma-reserved, 3212508K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc3d2c000 - 0xc3e42000 (1112 kB)
.data : 0xc38ce970 - 0xc3d17e00 (4389 kB)
.text : 0xc3000000 - 0xc38ce970 (9018 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Kernel/User page tables isolation: enabled
************************************************************
** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
** **
** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **
** Your performance will increase dramatically if you **
** switch to a 64-bit kernel! **
** **
** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **
************************************************************
ftrace: allocating 38113 entries in 75 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 2304, nr_irqs: 512, preallocated irqs: 16
CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 11 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Detected 2200.000 MHz processor
tsc: Detected 2199.996 MHz TSC
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=8799984)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Celeron(R) CPU 3965U @ 2.20GHz (family: 0x6, model: 0x8e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 2 processors activated (8799.98 BogoMIPS)
allocated 4718592 bytes of page_ext
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x865a6000-0x865a6fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8cb97000-0x8cf66fff] (3997696 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 1:21:19, date: 04/14/21
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1618363279.032:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Executed 33 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED00C800 00060F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED145000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED276600 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED277800 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED00D000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED277000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000ED277A00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
pci 0000:00:02.0: [8086:5906] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf12f000-0xdf12ffff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf12e000-0xdf12efff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf12d000-0xdf12dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf12c000-0xdf12c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf12b000-0xdf12b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d12] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:8821] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0x865a6000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8c67c000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8cb97000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8d400000-0x8fffffff]
e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
ACPI: IRQ 7 override to edge, high
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [io 0x0680-0x069f] has been reserved
system 00:0a: [io 0xffff] has been reserved
system 00:0a: [io 0xffff] has been reserved
system 00:0a: [io 0xffff] has been reserved
system 00:0a: [io 0x1800-0x18fe] has been reserved
system 00:0a: [io 0x164e-0x164f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:0c: [io 0x1854-0x1857] has been reserved
system 00:0c: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0d: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0e: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0e: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0e: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0e: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0e: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0e: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: [io 0xff00-0xfffe] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:10: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:10: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:10: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:10: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:10: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 17 devices
PnPBIOS: Disabled by ACPI PNP
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 51960K
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008ca82000 end: 0x0000008caa1fff
DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x2d534000-0x31534000] (64MB)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=14 max_order=20 bucket_order=6
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.3: AER enabled with IRQ 121
pcieport 0000:00:1c.0: Signaling PME with IRQ 120
pcieport 0000:00:1c.3: Signaling PME with IRQ 121
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x(ptrval), using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
isapnp: Scanning for PnP cards...
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:06: ttyS2 at I/O 0x3e8 (irq = 7, base_baud = 115200) is a 16550A
00:07: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
00:08: ttyS4 at I/O 0x2f0 (irq = 7, base_baud = 115200) is a 16550A
00:09: ttyS5 at I/O 0x2e0 (irq = 7, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
isapnp: No Plug & Play device found
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-140-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-140-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:0b: RTC can wake from S4
rtc_cmos 00:0b: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:0b: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq_nforce2: No nForce2 chipset
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 8 MCE banks
microcode: sig=0x806e9, pf=0x80, revision=0xde
microcode: Microcode Update Driver: v2.2.
Using IPI No-Shortcut mode
sched_clock: Marking stable (1542089850, 0)->(1527955867, 14133983)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: bdae4129001f36a91dc2e2b8b83efc1f633ef0c2'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
usb 1-2: new full-speed USB device number 2 using xhci_hcd
evm: HMAC attrs: 0x1
Magic number: 1:963:356
input event2: hash matches
acpi FPNT_DIS:00: hash matches
rtc_cmos 00:0b: setting system clock to 2021-04-14 01:21:21 UTC (1618363281)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel image memory: 1112K
Write protecting the kernel text: 9020k
Write protecting the kernel read-only data: 3492k
NX-protecting the kernel data: 7364k
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
usb 1-2: New USB device found, idVendor=05f9, idProduct=222f
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: Handheld Barcode Scanner
usb 1-2: Manufacturer: Datalogic ADC, Inc.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8105e at 0x(ptrval), 00:e0:4c:36:00:10, XID 00c00000 IRQ 123
usb 1-5: new full-speed USB device number 3 using xhci_hcd
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b100 irq 124
ata2: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b180 irq 124
ata3: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b200 irq 124
r8169 0000:02:00.0 enp2s0: renamed from eth0
tsc: Refined TSC clocksource calibration: 2208.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[drm] RC6 on
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-5: New USB device found, idVendor=13d3, idProduct=3458
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Bluetooth Radio
usb 1-5: Manufacturer: Realtek
usb 1-5: SerialNumber: 00e04c000001
usb 1-6: new high-speed USB device number 4 using xhci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata2.00: ATA-11: Hoodisk SSD, SBFM61.3, max UDMA/133
ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.PRT1._GTF, AE_NOT_FOUND (20170831/psparse-550)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hoodisk SSD 61.3 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
random: fast init done
usb 1-6: New USB device found, idVendor=05e3, idProduct=0608
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB2.0 Hub
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
usb 1-7: new low-speed USB device number 5 using xhci_hcd
usb 1-7: New USB device found, idVendor=1c4f, idProduct=0002
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB Keyboard
usb 1-7: Manufacturer: SIGMACHIP
usb 1-8: new full-speed USB device number 6 using xhci_hcd
usb 1-8: New USB device found, idVendor=2575, idProduct=c300
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: 0
usb 1-8: Manufacturer: Weida Hi-Tech
clocksource: Switched to clocksource tsc
usb 1-9: new full-speed USB device number 7 using xhci_hcd
usb 1-9: New USB device found, idVendor=2575, idProduct=c300
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: 0
usb 1-9: Manufacturer: Weida Hi-Tech
input: Datalogic ADC, Inc. Handheld Barcode Scanner as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:05F9:222F.0001/input/input7
hid-generic 0003:05F9:222F.0001: input,hidraw0: USB HID v1.10 Keyboard [Datalogic ADC, Inc. Handheld Barcode Scanner] on usb-0000:00:14.0-2/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1C4F:0002.0002/input/input8
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-7/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1C4F:0002.0003/input/input9
hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-7/input1
input: Weida Hi-Tech 0 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:2575:C300.0004/input/input10
hid-generic 0003:2575:C300.0004: input,hidraw3: USB HID v1.10 Device [Weida Hi-Tech 0] on usb-0000:00:14.0-8/input0
input: Weida Hi-Tech 0 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:2575:C300.0005/input/input11
hid-generic 0003:2575:C300.0005: input,hidraw4: USB HID v1.10 Device [Weida Hi-Tech 0] on usb-0000:00:14.0-9/input0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
systemd-journald[241]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1618363283.929:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1618363283.929:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=443 comm="apparmor_parser"
audit: type=1400 audit(1618363283.929:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1618363283.929:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1618363283.929:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1618363283.929:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=444 comm="apparmor_parser"
audit: type=1400 audit(1618363283.961:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=445 comm="apparmor_parser"
audit: type=1400 audit(1618363283.961:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=445 comm="apparmor_parser"
audit: type=1400 audit(1618363283.961:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=445 comm="apparmor_parser"
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Weida Hi-Tech 0: Invalid code 5 type 4
input: Weida Hi-Tech 0 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:2575:C300.0004/input/input12
hid-multitouch 0003:2575:C300.0004: input,hidraw3: USB HID v1.10 Device [Weida Hi-Tech 0] on usb-0000:00:14.0-8/input0
Weida Hi-Tech 0: Invalid code 5 type 4
input: Weida Hi-Tech 0 as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:2575:C300.0005/input/input13
hid-multitouch 0003:2575:C300.0005: input,hidraw4: USB HID v1.10 Device [Weida Hi-Tech 0] on usb-0000:00:14.0-9/input0
input: PC Speaker as /devices/platform/pcspkr/input/input14
cfg80211: Loading compiled-in X.509 certificates for regulatory database
usbcore: registered new interface driver btusb
Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin
bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.bin failed with error -2
Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_fw.bin
Bluetooth: hci0: rom_version status=0 version=1
Bluetooth: hci0: cfg_sz 0, total size 17428
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:998396k SSFS
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
rtl8821ae 0000:01:00.0 wlp1s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Front Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
wlp1s0: authenticate with 14:d1:69:0b:57:c4
wlp1s0: send auth to 14:d1:69:0b:57:c4 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 14:d1:69:0b:57:c4 (try 1/3)
wlp1s0: RX AssocResp from 14:d1:69:0b:57:c4 (capab=0x411 status=0 aid=1)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
input: Risintech M-Touch Mouse as /devices/virtual/input/input22
input: Risintech A-Touch Mouse as /devices/virtual/input/input23
input: Risintech R-Touch Mouse as /devices/virtual/input/input24
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11